Copyright (C) dzwigi.org 2011 / Created by
During a recent lifting operation, we have used our mobile crane, Grove GMK 4075, for the purposes of installation of chimney components in a local plant in Libiąż. The total height of the chimney was 55 meters, and the weight of the top element was about 3 tons. Thanks to good planing and coordination, the whole lift was completed safely in less than four hours. Below you can see the photos from the lift.
Last week, our mobile crane, Grove GMK 4075, performed a series of lifts during the installation of a billboard at the grounds of the new market hall, CH Zaleze, in Katowice. The total height of the column was 32 meters, out of which the heaviest element had a weight of 8.5 tons. The night part of the operation consisted of installation of the column elements, as well as the main, top part with the lit-up billboard. Because the top part was preassembled on a nearby parking lot (about 70 meters away), it was necessary to move it across the lot, which was carried out with 2 separate lifts, before the final placement on the top of the column. Below pictures from the operation.
It is yet another time, when our company was called to deliver complex lifting services, during the installation of a gantry crane. This time, the assembly took place in a production hall Mikołów. The gantry crane consisted of three major parts, out of which the heaviest weighted 8 tons. Our mobile crane, Liebherr LTM 1040, turned out to be an ideal choice for this task. Limited turning radius imposed by tight alleys of the production hall were no obstacle in getting to the assembly spot. The construction elements of the hall’s roof limited the maneuverability during the operation, but thanks to well-planned positioning, and perfect communication with the installation team, the entire operation was accomplished safely, quickly, and without any disruptions to the plan. We invite you to view a short clip showing all the lifts that were performed at the site.
Last month, we were involved in providing lifting services for the loading, transport, and unloading of two machines weighing 40 and 20 tons. In order to perform this task, we selected our mobile crane GROVE GMK 4075,. Thanks to a quick and coordinated operation, the entire time, including the loading in Łaziska Górne and unloading in Mikołów, took only several hours. A video clip and photos posted below illustrate the course of the entire operation.
Recently, we have been given a task of assembling and lifting a gantry crane in a new production plant in Tychy, Poland. For this task we selected our 20-ton mobile crane KRUPP KMK 2020,. Our crane services on site included assembling of the gantry crane elements, and positioning the whole structure on tracks, at a height of 6 meters. Limited space under the roof was the biggest challenge, but thanks to small boom tip of our crane, we were able to safely maneuver in little extra space provided by the skylight, which in turn allowed us to gain the required lifting height. We invite you to view a short clip and photos which illustrate the course of the whole operation.
One of our mobile cranes, LIEBHERR LTM 1070, performed a series of lifts for the company installing air conditioning units on top of a new building in the center of Katowice. In order to perform the task, the crane needed a fully extended, 42-meter boom configured with an 18-meter jib inclined at a 30 degree angle. This particular configuration allowed for an easy access to the places located at a further distance from the edge of the building – as you can see on the photos taken at the site.
We have completed our crane hire services at the construction site of the new Jaliellonian University campus in Krakow. Lifting tasks included assembling of the steel construction elements of a tunnel connecting two buildings, and positioning the preassembled structure at the height of 8 meters above the ground level. The total weight of the load added up to 20 tons. In order to perform the series of lifts we used our mobile crane KRUPP KMK 3050.
Last Thursday, two of our mobile cranes were called to assist in the transport of a 20-ton hydraulic press for company Sofir Poland. The first part of the task involved lifting and rotating the press to horizontal position, for transport purposes, at the old location in Ledziny. In the second stage the machine was unloaded and positioned at the new location in Oswiecim. Our 70-ton mobile crane, LIEBHERR LTM 1070, served as the main crane and the 50-ton KRUPP KMK 3050 assisted in rotating the press. The video clip and pictures presented below illustrate the process.
For the past several months, our mobile crane, LIEBHERR LTM 1050, has been employed to provide complex lifting services at Warta Cement Plant in Trebaczów, Poland, where a project involving the transport of cement from old to new silos is under way. It is yet another time when we cooperate with MEGAMONT construction company, providing all range of lifting services for the project purposes. Below, we present a video clip and several photos from the plant site – courtesy of our partner.
Since early April we have been providing lifting services at the construction site of new Castorama in Oświęcim. The main tasks included lifting steel beams and other elements of the construction assembly. For this job, we have used our mobile cranes: KRUPP KMK 3050 and BUMAR DS-254. The entire area of the new supermarket is going to cover 7000 square meters. Below, you can see several photos from the site.
For the past few months, we have been supplying complex lifting services on the construction site of the new Central Europe Shopping Park. The services provided by our company involved mainly lifting the elements of the steel construction, as well as all sorts of loading and unloading operations. To perform these tasks, we used 3 of our mobile cranes: Liebherr LTM 1040, Faun RTF 30-2 and Bumar DS-185. Feel free to check out our gallery.
Over the last month, our mobile cranes have performed a series of complicated lifts involving unloading and positioning of the production line machines, in Gliwice. Several of our mobile cranes, including Liebherr LTM 1070, Liebherr LTM 1040 and Faun RTF 30-2 have been used to perform all the necessary lifting tasks. The weight of the machines varied from 10 to 40 tons. All of the elements had to be assembled under a low roof, which significantly reduced the allowable height. Because of this issue, the positioning of the cranes had to be carefully planned each time.
We invite you view our gallery from the construction of a mixing station in Kazimierz Biskupi, near Konin. The main tasks of our mobile crane, Liebherr LTM 1070, consisted of assembling the steel beam elements, and positioning the mixing tanks at the height of 20 meters. Thanks to safe and quick execution of all the lifts, the cooperation with our long-time client was, again, accomplished in time and according to plan!
Recently, we have noticed an increased demand for the mobile aerial lift services in Tychy and in the local area. Our lifts have visited many places all around Silesian area, enabling quick and easy access to hard-to-reach places on heights. We have received a very positive feedback from our local clients, who were able to recognize our ability to quickly and efficiently mobilize our equipment at every single moment, day and night!
If you live in the Silesia area, you had a great chance of spotting our 70-ton Liebherr LTM 1070 recently, working in many places including Tychy, Katowice, Gliwice, Mikołów or Jaworzno. One of the most interesting recent tasks was to install a 4.5-ton machine over the roof of a 15-meter factory building, at the radius of 24 meters. Check out the pictures in the gallery, and visit our Fan Page on facebook to leave your comments and feedback.
Our website is now fully optimized with respect to the most popular social media portals. Now, you can follow us on Facebook, Twitter, Google+, and Linkedin. You can „like” our posts, or even „like” our machines, give us a plus, or share our updates and news with your friends.
Our new social media have a goal of not only promoting our company’s image online, but also creating a friendly environment for the discussion in the area of cranes and construction industry overall. Additionally, by following our tweets and posts on facebook, you can stay up to date with the newest technologies and news from the world or crane industry.
We invite you to visit and „like” our Fan Page on Facebook!
In response to the growing demand in the market for the range of small cranes and lifts (up to 10 ton capacity), we decided to add two new machines to our current fleet. These are Bumar DS-0101 truck-mounted mobile crane with the maximum lifting capacity of 10 tons and the maximum lifting height of 22.5 m., and JCB 537 telescopic handler with the maximum lift capacity of 3.7 ton and maximum lifting height of 13.5 m. Our new JCB 537 can be configured with different attachments, enabling it to work as a dirt loader, or mobile platform for high reach personnel access.
Feel free to inspect the technical specifications of our new machines in the EQUIPMENT section of our website.
Recently, we have been providing lifting services at the construction site of the new Małopolska Art Garden, located in the centre of Krakow. The greatest challenge was the extremely limited operating space, due to old architecture, closely surrounding the area. Our crane, KRUPP KMK 2020, was an ideal choice for our customer, providing small overall dimensions, and unparalleled manoeuvrability at the extremely tight corners. The job consisted of lifting steel beams and positioning them between the glass wall and the scaffold, where the maximum clearance was only 40 cm. Thanks to perfect precision and good communication, all the lifts were completed quickly and safely.
We invite to view our gallery from the construction assembly in Mikolow. Both the access and the working range were extremely limited due to local buildings. Steep gradient at the site presented additional challanges. Thanks to our versitile cranes – LIEBHERR LTM 1040 and LTM 1050 - the disassembly of the air-conditioning units, as well as the new construction assembly has been completed quickly, safely, and efficiently. What others considered impossible, we have achieved without even slightest problems!
The construction assembly of the mixing station in Stockholm, Sweden has been completed. Throughout the duration of the project, which lasted for eigth months, two of our LIEBHERR cranes: LTM 1050 and LTM 1040 have been used to provide lifting services. All the tasks were completed safely and efficiently. We invite you to view the gallery.
Welcome to our new website! We hope that You will be able to familiarize with our offer in a transparent and effective way. As a company with the established position we focus on modernity in communication with our customers. You are welcome to cooperate with us ! Join us !